Skip navigation Accessibility information
Carbon - Foil Last updated
July 30 2021
C C 000440

1 of 1

If the item shown is not exactly what you require please let us know by sending us a message
Thickness : 2.5mm
Purity : 99.95%
Condition : Rigid Graphite
Grain size : Fine
Carbon foils are stocked in five basic forms: <B>Pyrolitic graphite </B>- a strongly anisotropic, high density, high purity material manufactured by Chemical Vapour Deposition (CVD). It is non porous and self lubricating, lightweight and shows excellent thermal shock resistance. It can be easily machined with normal metalworking tools. <B>Flexible graphite</B> - an exfoliated material which is mechanically bonded to form thin, flexible sheet. It is commonly used as a gasket material for corrosive or high temperature service (up to 600C in air, 2500C in an inert atmosphere). <B>Rigid graphite sheet </B>- a rigid form of graphite. The exceptional corrosion resistance and high temperature properties of graphite make this material suitable for applications as diverse as heat exchanger blocks for chemical process plant and arc furnace electrodes used in steel manufacture. <B>Highly Oriented Pyrolytic Graphite (HOPG) </B>- a highly oriented form of high purity pyrolytic graphite which
diffracts x-rays and neutrons with greater efficiency than any other material. <B>Vitreous or Glassy Carbon </B>- is available under a separate heading. This material has high flexural strength with zero open porosity and, hence, a low permeability to gases
 
Click on a price to add to shopping cart ( Prices are in USD)
Size
Order Code Size 1 pc 2 pcs 5 pcs 10 pcs
642-012-49 25x25 mm USD 215.00 USD 253.00 USD 334.00 USD 439.00
251-550-08 50x50 mm USD 287.00 USD 353.00 USD 494.00  
443-756-09 100x100 mm USD 429.00 USD 575.00    
 
 
Click on a price to add to shopping cart ( Prices are in USD)

Packing Packing costs are included in the price.
Terms of shipment Prices include delivery but not local taxes
Technical Data for     Carbon       Foil
Typical Analysis : (ppm) Al 5, Ba 1, Ca 50, Co <5, Cr <5, Cu <5, Fe 5, Ni 50, Si <5, Ti 30, V 100, Zr <20.
Tolerances
  Thickness:   <0.010mm   ±25%
    0.01-0.05mm   ±15%
    >0.050mm   ±10%
  Size (linear dimension):   <100mm   ±1mm
    ≥100mm   +2% / -1%

1 of 1

Back to Top