Skip navigation Accessibility information

Polyimide ( PI ) - Tube   -   Material Information

Buy Polyimide Tube on-line

We stock and supply the following standard forms:
Film Laminate Metallized Film Rod Sheet Tube
Film Laminate Metallized Film Rod Sheet Tube
Common Brand Names:
Kapton, Kinel, Vespel
General Description:  

General Description : Normally infusible, coloured (often amber) high performance polymers with predominantly aromatic molecules of high thermal stability. Semi-fabricated shapes are usually supplied by the polymer manufacturer and made by powder sintering or working with more tractable pre-cursors and completing polymerisation in final form, though some melt-processable grades of resin are manufactured. They have excellent high temperature properties and radiation resistance, inherently low flammability and smoke emission, low creep and high wear resistance and are very expensive. They have moderately high water absorption and are prone tohydrolysis and attack by alkalis and concentrated acids.

A widely used form is DuPont™ Kapton® film, made in thicknesses from 0.008 to 0.125mm and which is a transparent amber colour. Thicker polyimide items are usually opaque. A range of DuPont™ Kapton® film variants are also available. In each of these, a large measure of DuPont™ Kapton® basic properties are combined with an extra attribute eg increased electrical or thermal conductivity,improved corona resistance, opacity and thermoplasticity.

Films are used for capacitators, insulation, printed circuit boards and in aerospace; other applications include engine components, bearings and mechanical parts exposed to radiation.

Explanation of DuPont™ Kapton® grade descriptions

HN Regular DuPont™ Kapton® - Transparent Amber CB Opaque black version of HN MT Aluminium oxide filled, increased thermal conductivity, opaque yellow MTB Opaque black version of MT
CR Improved corona resistance - translucent yellow XC Electrically (semi-)conductive - opaque black FPC Superior dimensional stability and adhesion compared to HN HPP-ST Similar to FPC a two-sided treated film with superior dimensional stability and superior adhesion compared to HN 200RS100 Two layer film with an electrically conductive layer on one side KJ Thermoplastic - transparent yellow PST A tough film that exhibits an excellent balance of physical, chemical and electrical properties over a wide temperature range, particularly at unusually high temperatures CRC Enhanced corona resistant version of CR FN Heat sealable version of HN with one or both sides coated with DuPont FEP GS Specifically designed and manufactured to expand the processing window and improve yields during artificial graphite sheet production FCR Used in magnet wire insulation that will withstand corona discharge FWN Multi-layer polyimide & fluoropolymer dispersion-coated film MT+ Enhanced version of MT with approaching double its thermal conductivity PRN411 Multi-layer heat-fusible composite film that enables higher operational temperature functionality and improved abrasion resistance

Availability of DuPont™ Kapton® Grades

Unfortunately due to export restrictions and rationalisation of the DuPont™ Kapton® product range, there are potential issues with the supply of some grades and thicknesses.

DuPont™ Kapton® HN 0.008 mm thick: This specific thickness of DuPont™ Kapton® HN is controlled under ECCN 9A515(x) requirements and is not offered outside of the US.

DuPont™ Kapton® XC & CB: These products are controlled under ECCN 9A515(x)requirements and are not offered outside of the US.

DuPont™ Kapton® KJ & MTB: Regrettably these grades are no longer produced by DuPont™ and we only have a limited range available from our stock.

Please contact your local sales office for an up to date statement on the availability of all grades of DuPont™ Kapton®.

DuPont™, Kapton® & Nomex® are registered trademarks of E.I. du Pont de Nemours and Company.



Technical Data for   Polyimide

Polyimide Tube - Standard Products   Click here to display prices
IM307012Polyimide Tube,    
Outside Diameter:0.168mm, Wall Thickness:0.023mm, Inside Diameter:0.122mm
IM307013Polyimide Tube,    
Outside Diameter:0.18mm, Wall Thickness:0.02mm, Inside Diameter:0.14mm
IM307014Polyimide Tube,    
Outside Diameter:0.193mm, Wall Thickness:0.019mm, Inside Diameter:0.155mm
IM307015Polyimide Tube,    
Outside Diameter:0.196mm, Wall Thickness:0.015mm, Inside Diameter:0.166mm
IM307016Polyimide Tube,    
Outside Diameter:0.201mm, Wall Thickness:0.022mm, Inside Diameter:0.157mm
IM307030Polyimide Tube,    
Outside Diameter:0.30mm, Wall Thickness:0.025mm, Inside Diameter:0.25mm
IM307040Polyimide Tube,    
Outside Diameter:0.35mm, Wall Thickness:0.025mm, Inside Diameter:0.3mm
IM307046Polyimide Tube,    
Outside Diameter:0.46mm, Wall Thickness:0.025mm, Inside Diameter:0.41mm
IM307048Polyimide Tube,    
Outside Diameter:0.54mm, Wall Thickness:0.05mm, Inside Diameter:0.44mm
IM307050Polyimide Tube,    
Outside Diameter:0.55mm, Wall Thickness:0.025mm, Inside Diameter:0.5mm
IM307055Polyimide Tube,    
Outside Diameter:0.67mm, Wall Thickness:0.025mm, Inside Diameter:0.62mm
IM307100Polyimide Tube,    
Outside Diameter:1.05mm, Wall Thickness:0.025mm, Inside Diameter:1.0mm
IM307101Polyimide Tube,    
Outside Diameter:1.105mm, Wall Thickness:0.05mm, Inside Diameter:1.00mm
IM307118Polyimide Tube,    
Outside Diameter:1.78mm, Wall Thickness:0.08mm, Inside Diameter:1.62mm
IM307190Polyimide Tube,    
Outside Diameter:1.90mm, Wall Thickness:0.050mm, Inside Diameter:1.80mm
IM307199Polyimide Tube,    
Outside Diameter:1.99mm, Wall Thickness:0.032mm, Inside Diameter:1.93mm
IM307200Polyimide Tube,    
Outside Diameter:2.10mm, Wall Thickness:0.05mm, Inside Diameter:2.0mm
IM307300Polyimide Tube,    
Outside Diameter:3.0mm, Wall Thickness:0.03mm, Inside Diameter:2.94mm
IM307320Polyimide Tube,    
Outside Diameter:3.48mm, Wall Thickness:0.14mm, Inside Diameter:3.2mm
IM307400Polyimide Tube,    
Outside Diameter:4.2mm, Wall Thickness:0.07mm, Inside Diameter:4.06mm
IM307500Polyimide Tube,    
Outside Diameter:5.0mm, Wall Thickness:0.075mm, Inside Diameter:4.85mm
IM307600Polyimide Tube,    
Outside Diameter:6.0mm, Wall Thickness:0.075mm, Inside Diameter:5.85mm
IM307820Polyimide Tube,    
Outside Diameter:10.0mm, Wall Thickness:0.085mm, Inside Diameter:9.83mm
IM307828Polyimide Tube,    
Outside Diameter:10.28mm, Wall Thickness:0.14mm, Inside Diameter:10.0mm
IM307834Polyimide Tube,    
Outside Diameter:20.02mm, Wall Thickness:0.038mm, Inside Diameter:19.94mm
IM307840Polyimide Tube,    
Outside Diameter:30.6mm, Wall Thickness:0.3mm, Inside Diameter:30.0mm
Polyimide Tube - Standard Products   Click here to display prices
We stock and supply the following standard forms:
Film Laminate Metallized Film Rod Sheet Tube
Film Laminate Metallized Film Rod Sheet Tube