:: TPX® Grades ::
TPX® Polymethylpentene (PMP) Grades
TPX® is available in a range of grades to allow a number of processing techniques to be employed and hence making it possible to produce a wide range of different products. As well as tailoring the properties of TPX® for specific processing techniques, the base properties of TPX® have also been adjusted to create a range of grades with differing physical properties.
- Injection Molding
- Extrusion
- Blow Molding
- Coating
- High, Medium and Low Rigidity
- Blue Tint
- Low Odor
- High Flow
|
Grade |
Description |
Melt Flow Rate(MFR) |
Comments |
|
MX002 |
Injection Molding/Extrusion |
21 g/10 min |
Low Rigidity |
|
MX002O |
Extrusion for food applications (except EU) |
21 g/10 min |
Low Rigidity |
|
MX004 |
Injection Molding/Extrusion |
25 g/10 min |
Medium Rigidity |
|
MX004XB |
Injection Molding/Extrusion - Blue Tint |
25 g/10 min |
Medium Rigidity |
|
RT18 |
Injection Molding |
26 g/10 min |
High Rigidity |
|
RT18XB |
Injection Molding - Blue Tint |
26 g/10 min |
High Rigidity |
|
RT31 |
Injection Molding - Less Odor |
21 g/10 min |
High Rigidity |
|
RT31XB |
Injection Molding - Less Odor & Blue Tint |
21 g/10 min |
High Rigidity |
|
DX231 |
Coating |
100 g/10 min |
High Rigidity |
|
DX310 |
Coating |
100 g/10 min |
Low Rigidity |
|
DX350 |
Coating |
110 g/10 min |
High Rigidity |
|
DX820 |
Coating & Additive / High Flow |
180 g/10 min |
High Rigidity |
|
DX845 |
Extrusion |
9 g/10 min |
High Rigidity |
|
DX Series |
MX Series |
RT Series |
|
|
||
|
|
|
|
|
|
|